Paginate Results

On this page Carat arrow pointing down
Warning:
CockroachDB v21.1 is no longer supported as of November 18, 2022. For more details, refer to the Release Support Policy.

To iterate through a table one "page" of results at a time (also known as pagination) there are two options, only one of which is recommended:

  • Keyset pagination (fast, recommended)
  • LIMIT / OFFSET pagination (slow, not recommended)

Keyset pagination

Keyset pagination (also known as the "seek method") is used to fetch a subset of records from a table quickly. It does this by restricting the set of records returned with a combination of WHERE and LIMIT clauses. To get the next page, you check the value of the column in the WHERE clause against the last row returned in the previous page of results.

The general pattern for keyset pagination queries is:

icon/buttons/copy
SELECT * FROM t AS OF SYSTEM TIME ${time}
  WHERE key > ${value}
  ORDER BY key
  LIMIT ${amount}

This is faster than using LIMIT/OFFSET because, instead of doing a full table scan up to the value of the OFFSET, a keyset pagination query looks at a fixed-size set of records for each iteration. This can be done quickly provided that the key used in the WHERE clause to implement the pagination is indexed and unique. A primary key meets both of these criteria.

Note:

CockroachDB does not have cursors. To support a cursor-like use case, namely "operate on a snapshot of the database at the moment the cursor is opened", use the AS OF SYSTEM TIME clause as shown in the examples below.

Example

The examples in this section use the employees data set, which you can load into CockroachDB as follows:

icon/buttons/copy
CREATE DATABASE IF NOT EXISTS employees;
USE employees;
IMPORT PGDUMP 'https://s3-us-west-1.amazonaws.com/cockroachdb-movr/datasets/employees-db/pg_dump/employees-full.sql.gz' WITH ignore_unsupported_statements;

To get the first page of results using keyset pagination, run the statement below.

icon/buttons/copy
SELECT * FROM employees AS OF SYSTEM TIME '-1m' WHERE emp_no > 10000 ORDER BY emp_no LIMIT 25;
emp_no |        birth_date         | first_name |  last_name  | gender |         hire_date
---------+---------------------------+------------+-------------+--------+----------------------------
 10001 | 1953-09-02 00:00:00+00:00 | Georgi     | Facello     | M      | 1986-06-26 00:00:00+00:00
 10002 | 1964-06-02 00:00:00+00:00 | Bezalel    | Simmel      | F      | 1985-11-21 00:00:00+00:00
 10003 | 1959-12-03 00:00:00+00:00 | Parto      | Bamford     | M      | 1986-08-28 00:00:00+00:00
 10004 | 1954-05-01 00:00:00+00:00 | Chirstian  | Koblick     | M      | 1986-12-01 00:00:00+00:00
 ...
(25 rows)

Time: 4ms total (execution 3ms / network 0ms)
Tip:

When writing your own queries of this type, use a known minimum value for the key's data type. If you do not know what the minimum value of the key is, you can use SELECT min(key) FROM table.

Note:

We use AS OF SYSTEM TIME in these examples to ensure that we are operating on a consistent snapshot of the database as of the specified timestamp. This reduces the chance that there will be any concurrent updates to the data the query is accessing, and thus no missing or duplicated rows during the pagination. It also reduces the risk of transaction retries due to concurrent data access. The value of -1m passed to AS OF SYSTEM TIME may need to be updated depending on your application's data access patterns.

To get the second page of results, run:

icon/buttons/copy
SELECT * FROM employees AS OF SYSTEM TIME '-1m' WHERE emp_no > 10025 ORDER BY emp_no LIMIT 25;
  emp_no |        birth_date         | first_name | last_name  | gender |         hire_date
---------+---------------------------+------------+------------+--------+----------------------------
   10026 | 1953-04-03 00:00:00+00:00 | Yongqiao   | Berztiss   | M      | 1995-03-20 00:00:00+00:00
   10027 | 1962-07-10 00:00:00+00:00 | Divier     | Reistad    | F      | 1989-07-07 00:00:00+00:00
   10028 | 1963-11-26 00:00:00+00:00 | Domenick   | Tempesti   | M      | 1991-10-22 00:00:00+00:00
   10029 | 1956-12-13 00:00:00+00:00 | Otmar      | Herbst     | M      | 1985-11-20 00:00:00+00:00
...
(25 rows)

Time: 2ms total (execution 1ms / network 1ms)

To get an arbitrary page of results showing employees whose IDs (emp_no) are in a much higher range, run the following query. Note that it takes about the same amount of time to run as the previous queries.

icon/buttons/copy
SELECT * FROM employees AS OF SYSTEM TIME '-1m' WHERE emp_no > 300025 ORDER BY emp_no LIMIT 25;
  emp_no |        birth_date         | first_name |  last_name   | gender |         hire_date
---------+---------------------------+------------+--------------+--------+----------------------------
  400000 | 1963-11-29 00:00:00+00:00 | Mitsuyuki  | Reinhart     | M      | 1985-08-27 00:00:00+00:00
  400001 | 1962-06-02 00:00:00+00:00 | Rosalie    | Chinin       | M      | 1986-11-28 00:00:00+00:00
  400002 | 1964-08-16 00:00:00+00:00 | Quingbo    | Birnbaum     | F      | 1986-04-23 00:00:00+00:00
  400003 | 1958-04-30 00:00:00+00:00 | Jianwen    | Sidhu        | M      | 1986-02-01 00:00:00+00:00
  400004 | 1958-04-30 00:00:00+00:00 | Sedat      | Suppi        | M      | 1995-12-18 00:00:00+00:00
....
(25 rows)

Time: 2ms total (execution 1ms / network 0ms)

Compare the execution speed of the previous keyset pagination queries with the query below that uses LIMIT / OFFSET to get the same page of results:

icon/buttons/copy
SELECT * FROM employees AS OF SYSTEM TIME '-1m' LIMIT 25 OFFSET 200024;
  emp_no |        birth_date         | first_name |  last_name   | gender |         hire_date
---------+---------------------------+------------+--------------+--------+----------------------------
  400000 | 1963-11-29 00:00:00+00:00 | Mitsuyuki  | Reinhart     | M      | 1985-08-27 00:00:00+00:00
  400001 | 1962-06-02 00:00:00+00:00 | Rosalie    | Chinin       | M      | 1986-11-28 00:00:00+00:00
  400002 | 1964-08-16 00:00:00+00:00 | Quingbo    | Birnbaum     | F      | 1986-04-23 00:00:00+00:00
  400003 | 1958-04-30 00:00:00+00:00 | Jianwen    | Sidhu        | M      | 1986-02-01 00:00:00+00:00
...
(25 rows)

Time: 158ms total (execution 156ms / network 1ms)

The query using LIMIT/OFFSET for pagination is almost 100 times slower. To see why, let's use EXPLAIN.

icon/buttons/copy
EXPLAIN SELECT * FROM employees LIMIT 25 OFFSET 200024;
                                          info
----------------------------------------------------------------------------------------
  distribution: full
  vectorized: true

  • limit
  │ estimated row count: 25
  │ offset: 200024
  │
  └── • scan
        estimated row count: 200,049 (67% of the table; stats collected 5 minutes ago)
        table: employees@idx_17110_primary
        spans: LIMITED SCAN
        limit: 200049
(12 rows)

Time: 4ms total (execution 3ms / network 0ms)

The culprit is this: because we used LIMIT/OFFSET, we are performing a limited scan of the entire table (see spans: LIMITED SCAN above) from the first record all the way up to the value of the offset. In other words, we are iterating over a big array of rows from 1 to n, where n is 200049. The estimated row count row shows this.

Meanwhile, the keyset pagination queries are looking at a much smaller range of table spans, which is much faster (see spans: [/300026 - ] and limit: 25 below). Because there is an index on every column in the WHERE clause, these queries are doing an index lookup to jump to the start of the page of results, and then getting an additional 25 rows from there. This is much faster.

icon/buttons/copy
EXPLAIN SELECT * FROM employees WHERE emp_no > 300025 ORDER BY emp_no LIMIT 25;
                                       info
----------------------------------------------------------------------------------
  distribution: local
  vectorized: true

  • scan
    estimated row count: 25 (<0.01% of the table; stats collected 6 minutes ago)
    table: employees@idx_17110_primary
    spans: [/300026 - ]
    limit: 25
(8 rows)

Time: 1ms total (execution 1ms / network 0ms)

As shown by the estimated row count row, this query scans only 25 rows, far fewer than the 200049 scanned by the LIMIT/OFFSET query.

Warning:

Using a sequential (i.e., non-UUID) primary key creates hot spots in the database for write-heavy workloads, since concurrent INSERTs to the table will attempt to write to the same (or nearby) underlying ranges. This can be mitigated by designing your schema with multi-column primary keys which include a monotonically increasing column.


Yes No
On this page

Yes No